深圳市中科五金制品有限公司

IMDS English called: Inernational Material Data System, is the mechanism of material components are one of the third party accreditation. Web site address is: Http://mdsystem.com

IMDS is about the parts and materials database system for the automobile industry. It is composed of car manufacturing company Audi, BMW, Daimler Chrysler, Ford, Opel, Porsche, mass and Sweden's Volvo automobile group joint development. During and other auto manufacturers joined the alliance, and other enterprises are interested in joining the IMDS during the consultations.

IMDS to save and maintain all used in the automobile manufacturing process related material information. Only in this way can perform through the national and international standards, laws and regulations of the obligations given to car manufacturers and their suppliers.

The use of IMDS to provide information advantages to customers:

1 automobile industry enterprises and vehicle parts and components enterprises, including a supplier, the supplier can use two level etc..

2 the supplier must use only the IMDS of a system can provide the parts data to multiple vendors

3 only uses a central system enables suppliers to reduce costs

Data structure of 4 of its own database can receive IMDS, so as to improve its function

5.IMDS can help meet the national and European (such as the European End-of-Life Vehicles Directive (2000/53/EC) test; it can guarantee Ford material management standard (RSMS)

6 has been most recognized companies.

Extended reading:

The 1.IMDS registration method using <http://ibm.e-works.net.cn/document/200712/article3142_1.htm>

2.IMDS IMDS - the daily management of <http://ibm.e-works.net.cn/document/200802/article4296.htm>

The 3.<http://www.mdsystem.com/html/zh/home_zh.htm> home page.

The difference between IMDs and MSDS

The full name of IMDS is: Inernational Material Data System, is the mechanism of material components are one of the third party accreditation. 

(IMDS) is an international network for the foundation, as the system library convenient suppliers to set up raw materials data tables. Raw data table which we used parts weight, its raw material and the material foundation of information. The IMDS raw data table will automatically turn into raw material information of our company the database. The data will be used for legitimate test, recovery rate calculation, we are very important in the development of product a ring. IMDS is in the data structure of each industry manufacturers and suppliers identified as the supplier is now registered supplier raw data standards more than just use the IMDS a system can provide the parts data using only one center system can make the suppliers to reduce the cost of its own database can receive IMDS from multiple vendors, in order to improve the function of IMDS can help meet the national and European

(such as the European End-of-Life Vehicles Directive (2000/53/EC) inspection standard; also can guarantee the Ford material management standard (RSMS) and MSDs. The chemical safety technical specifications (MSDS) provides a variety of Information related to safety, health and environmental protection aspects of the chemical substances and products, and can provide information about chemical basic knowledge, protective measures and emergency action and other aspects of the data. In some countries, MSDS also called material safety data sheets (SDS), using SDS terminology in 11014 ISO. MSDS is a chemical production and supply enterprises to provide the basic hazard information to the user tools (including transportation, handling, storage and emergency action etc.). From the above we can know MSDS attention is paid to the harm degree of chemical composition, two concepts have different priorities.

MSDS

MSDS (Material Safety Data Sheet) that the MSDS, also translated as the chemical safety technical specifications or chemical safety data sheets. The physical and chemical properties is a manufacturer and importer of chemicals used to elucidate the chemicals (such as the pH value, flash point, flammable, reaction activity, etc.) as well as the health of users (such as carcinogenic, teratogenic and so on) a document that could be harmful. In Europe, MSDS is also known as the safety technology / data specification SDS (Safety Data sheet). The international organization for Standardization (ISO) 11014 with SDS terms, however, the United States, Canada, Australia and many Asian countries are using MSDS terminology.

MSDS is a comprehensive legal document about the chemical characteristics of chemical production or sales of enterprises to provide required by law. It provides physical and chemical parameters, chemical explosive performance, harm, safe use of storage and leakage disposal, emergency measures on health and the relevant laws and regulations and so on sixteen contents. MSDS can be used by the manufacturer in accordance with the relevant rules of self prepared. But in order to ensure the accurate specification of the report.

MSDS brief description of dangerous chemicals on human health and the environment and to provide safe handling, Zhu Cunhe use of the chemical information. As a service to users, with the chemical products manufacturing enterprises should provide security to the user manual, allowing users to understand the hazards of chemicals, when using, can take the initiative to protection, to reduce the occupational hazards and prevention of chemical accidents role. At present the developed countries such as the United States, Japan, EU has established and implemented a MSDS system, requiring manufacturers of hazardous chemicals in the sale, or transportation of export their products, while providing a copy of the product safety instructions.

The goal of MSDS is rapid and extensive transfer chemical product safety data information critical to the user, especially facing emergency situations, to prevent them from being potential hazards of chemical products. MSDS chemical product safety data information includes: chemical product and company information identifier; compound or composition; harm the human body may appear true use or misuse of the chemical products of health symptoms and hazard identification; emergency treatment instructions and a doctor's prescription; chemical products fire guide, including product ignition, explosion limit value and fire extinguishing materials suitable for making; accidental leakage caused damage to minimize the extent of the measures to be taken; the safe handling and storage measures; reduction of workers exposed to products and devices and measures of self-protection; physical and chemical properties of chemical products; changing the chemical product stability and react with other substances conditions; information on the toxicity of chemical material and its compounds; ecological information of chemical substances, including material effects on animals and plants and the environment may cause; suggestions on the treatment of the material; transport classification information basic; additional instructions relating to the substance of the rules and regulations of the other information.

The main effect of chemical safety instructions

Chemical safety manual transmission product safety information as the most basic technical documents, the main role is reflected in:

1 to provide information about the hazards of chemicals, chemical protection of the user of the product

2 to ensure the safety of operation, to formulate rules for safe operation of hazardous chemicals to provide technical information

3 to provide help to emergency rescue and accident emergency technical information processing

Safety production, safety in the circulation and safe use of the guidance of the 4 chemicals

5 is an important basic chemical registration management and information sources

Around the world in terms of domestic trade and international trade, the seller must provide the descriptive legal documents of products. Because each country, legal documents and even States chemical management and trade are not the same, there are some changes every month, so if the MSDS provided inaccurate or incomplete information, will face legal accountability. Therefore, the preparation of MSDS is an important symbol to measure a company's capability, image and management level. ,

1 conform to the American OSHA requirements of MSDS should have the following contents

The first: manufacturers and contact method

Second: the dangerous chemical component

Third: the physicochemical properties

Fourth: the combustion and explosion of data

Fifth: reactivity data

Sixth: health hazard data

Seventh: the safe operation and using method

Eighth: protection method

2 in line with the Canadian WHMIS requirements of MSDS should have the following contents

The first: the product and company information

Second: the dangerous chemical component

Third: physical characteristics

Fourth: fire or explosion data

Fifth: reactivity data

Sixth: toxicological characteristics

Seventh: preventive measures

Eighth: first aid method

Ninth: compilation of information

The MSDS content of the 3 American Standards Association ANSI and international standards organization ISO recommends implements

The first: the chemical name and manufacturer information

Second: the chemical composition information

Third: hazard information

Fourth: first aid measures

Fifth: fire protection measures

Sixth: Leakage Emergency Treatment

Seventh: operation and storage

Eighth: exposure controls and personal protection measures

Ninth: the physicochemical properties

Tenth: stability and reactivity

Eleventh: toxicological information

Twelfth: Ecology Information

Thirteenth: waste disposal

Fourteenth: Transport Information

Fifteenth: regulatory information

Sixteenth: other information

In our country with the international standard eqvISO11014-1:1994 (E) standards has formulated a standard GB16483-2000 "related to the chemical safety technical specifications written regulations"

The provisions of MSDs to have the content of the sixteen part

1 chemical product and company identification (chemical product and company identification)

The main marked chemical name, manufacturer name, address, zip code, telephone, emergency telephone, fax and e-mail address and other information.

The 2 component / composition information (composition/information on ingredients)

Indicates that the chemical is a pure chemical or mixture. Pure chemicals, should be given their chemical name or trade name and generic name. Mixture, should be given hazardous components concentration or concentration range. Whether it is a pure chemical or mixture, if it contains hazardous components, it should be given the index of Chemical Abstracts registry number (No. CAS).

The 3 risk overview (HAXARDS summarizing)

A brief overview of the most important chemicals hazards and effects, including: hazard categories, pathways, health hazards, environmental hazards, risk information such as blasting.

4 emergency measures (first-aid measures)

Refers to accidents hurt workers, including a brief treatment method, the need to take to live self or mutual aid: eye contact, skin contact, inhalation, ingestion of first aid measures.

5 fire protection measures (fire-fighting measures)

The main representation of chemicals the special physical and chemical hazard, suitable extinguishing media, as well as fire extinguishing media personal protection and other aspects of the information is not appropriate, including:

Medium and method of fire risk, characteristics, fire precautions etc..

6 leakage emergency treatment (accidental release measures)

Refer to note the chemical leak site can be used after simple and effective emergency measures, matters and elimination method, including: emergency response, emergency personnel protection, environmental protection measures, elimination and so on.

7 handling and storage (handling and storage)

Mainly refers to the chemical handling and safe storage of information, including: security operation disposal operations of attention to matters, safe storage conditions and.

The 8 contact control / personal protection (exposure controls/personal protection)

In the production, handling, handling and use of chemicals in the work process, protection and ways to protect workers from chemical hazards. Including:

Maximum allowable concentration, engineering control, respiratory protection, eye protection, physical protection, hand protection and other protection requirements.

9 physicochemical properties (physical and chemical properties)

The main description of the appearance of the chemical and physicochemical properties and other aspects of the information, including:

Appearance and properties, pH value, boiling point, melting point, relative density (water =1), relative density (air =1), saturated vapor pressure, heat of combustion, critical temperature, critical pressure, octanol / water partition coefficient, flash point and ignition temperature, explosion limit, solubility, main uses and other special physical and chemical properties.

10 stability and reactivity (stability and reactivity

Mainly describes the stability and reactivity of chemicals information, including: stability, cut material, should avoid polymerization conditions, contact hazards, decomposition products.

11 toxicology data (toxicological information)

Provide toxicological information, chemicals including: acute toxicity of different means of contact (LD50, LD50), irritation, sensitization, subacute and chronic toxicity, mutagenicity, teratogenicity, carcinogenicity.

12 ecological information (ecological information)

The environmental ecological effects, the main statement chemical behavior and outcomes, including: biological effects (such as LD50, LD50), biodegradation, bioaccumulation, environmental migration and other harmful environmental effects.

13 waste disposal (disposal)

Refers to the pollution by chemicals packing and non use value of chemicals safety processing method, including waste disposal method and the matters needing attention.

14 transport information (transport information)

Mainly refers to the domestic and international chemical packaging, transportation requirement and transportation regulation classification and numbering, including dangerous goods number, packaging category, packing and marking, packaging method, UN number and transport matters needing attention.

15 regulatory information (regulatory information)

Are mainly chemical management aspects of the legal provisions and standards.

16 other information (other information)

Mainly to provide other has important significance for the security of information, including references, the time to fill in a form, fill in the form of data auditing department, unit etc..

The chemical safety technical specifications complete guide

A1 chemical product and company identification (chemical product and company identification)

A1.1 chemical Chinese name fill in the name, the name or the name of the product [A].

A1.2 chemical English name fill in the name, the name or the name of the product [A].

A1.3 production enterprises to fill in the name of chemical production enterprises in English full name [A].

The A1.4 address of chemical production enterprises with address [A].

A1.5 zip fill postal code [A] chemical production enterprise.

A1.6 fax number fill in chemical production enterprise fax number is [A].

Emergency phone A1.7 enterprises under the fill in the emergency call chemical production enterprise emergency telephone number [A].

The A1.8 e-mail address to fill in the chemical production enterprise email address [C].

A1.9 technology specification code fill in product safety technical specification code [A].

A1.10 effective date to fill in the safety technical specifications published or revision date [A].

A1.11 national emergency telephone to fill in the emergency call chemical accidents under national emergency telephone number, fire emergency telephone number [A].

A2 component / composition information (composition/information on ingredients)

The main components of A2.1

A) fill out the main dangerous mixture composition and its content or content range.

Pure b) fill the name and the concentration range of harmful components.

A2.2 CAS to complete its harmful group number index of Chemical Abstracts registry points the chemicals.

Overview of A3 risk (hazards summarizing)

A3.1 risk categories according to GB13690-92 "classification and labels of dangerous chemical" provisions of the fill.

A3.2 pathways chemical way to invade the body to cause injury, such as inhalation, ingestion, skin contact.

A3.3 health hazards to fill in the poisoning of typical clinical manifestations, including the main target organs, acute poisoning, chronic poisoning symptoms and manifestations and carcinogenicity etc..

The harm of A3.4 environmental hazards are briefly described by chemicals at a certain concentration of various biological and damage degree.

The harm of A3.5 blasting danger a brief overview of chemicals in the air in the event of fire, high temperature or oxidant contact can cause.

A4 first aid measures (first-aid measures)

That brief treatment needed to take on-site workers accidentally by chemical damage of self-help and mutual help. A4.1 skin contact

A) poisonous products take off clothes, wash with cleaning medium recommended. Medical treatment.

B) secondary drug take off clothes, wash with cleaning medium recommended. Medical treatment.

C) harmful goods remove contaminated clothing, according to the recommended medium wash skin.

Fu Shipin d) according to the recommended medium wash. If it burns, medical treatment.

A4.2 eye contact

A) poisonous products immediately filed eyelid flush eyes with plenty of water, at least 15min. Medical treatment.

B) secondary drug immediately filed eyelid flush eyes with plenty of water, at least 15min. Medical treatment.

C) harmful goods filed eyelid, flush eyes with plenty of water

D) Fu Shipin immediately filed eyelid, rinse with water or saline, medical treatment.

A4.3 inhalation

A) toxic products, moderate drugs and harmful goods quickly evacuate to fresh air; if not breathing, give artificial respiration; if breathing is difficult, give oxygen (if appropriate antidote immediately take).

B) Fu Shipin immediately from the scene to fresh air, artificial respiration when necessary. Medical treatment.

A4.4 ingestion

A) poisonous products immediately seek medical treatment.

B) secondary drug immediately seek medical treatment.

C) harmful goods immediately seek medical treatment.

D) Fu Shipin immediately seek medical treatment.

A5 fire protection measures (fire-fighting measures)

A5.1 risk characteristics of the main fill in the event of fire, high temperature, oxidation agent may harm, reactive with water, acid, alkali and some active substances, and oxidation resistance, corrosion resistance etc..

A5.2 hazardous combustion products fill in the product of combustion, such as harmful gas.

Methods A5.3 fill in the fire extinguishing method and fire extinguishing agent. For the different categories of chemicals according to their properties and the state, suitable extinguishing media selection.

A5.4 fire precautions and measures

A) individual protective firefighter protective clothing should be used to fill in the body, such as protective clothing for firefighters, fire suits, fire protection boots, positive pressure self-contained breathing apparatus etc.;

B fire extinguishing agent) banned use fill should be prohibited, such as the prohibition of water, carbon dioxide, dry powder, foam, sand etc..

A6 leakage emergency treatment (accidental release measures)

A6.1 emergency treatment may refer to the following levels of fill:

A) rapid alarm, evacuation personnel concerned, isolation pollution area; evacuate many and isolate the pollution zone size, according to the toxicity leakage and leakage of concrete and.

B) cut off the power supply for flammable and explosive leakage must cut off the fire before clearing.

C) emergency personnel protection leakage as an emergency, protection requirements more stringent.

D) pay attention to direct contact with some substances not matters, some substances can be water spray to reduce volatilization, others can not water, some matters need cooling shock, this should according to the specific material and leak site selection.

E) elimination method according to the chemicals of the state (gas, liquid and solid) and risk (flammability, toxicity) and the requirements of environmental protection method for eliminating gives concrete.

F) equipment, equipment name required equipment when given emergency treatment.

A7 handling and storage (handling and storage)

A7.1 operation Notice refers to the security key points and individual protective chemicals in the process of operation.

A7.2 storage note reference the following level fill. &Otilde basic conditions and requirements of storage; storage limits &Otilde; note &Otilde; prohibited mixture &Otilde fireproof and explosion-proof requirements; &Otilde; packing considerations.

A8 contact control / personal protection (exposure controls/personal protection)

A8.1 maximum allowable concentration in the state promulgated the health standard as the basis to fill in, if the country has no standard, can refer to the relevant foreign standards, with (mg/m3) said.

A8.2 monitoring method to fill in the monitoring method of harmful substances in the air of workplace.

A8.3 engineering control basically fill in closed and ventilation protection and isolation measures in the production process automation control is not specified, the process of industrial production.

A8.4 respiratory protection to prevent harmful substances from entering the body of the respiratory protective equipment, mainly consider the following three aspects, namely the degree of harm and protective equipment operation environment, the poison from the respiratory system into the body's protective ability, recommended to choose air respirator, self to the respirator, oxygen breathing apparatus, filtration mask (half, comprehensive cover) anti-dust masks etc..

Mask A8.5 eye protection to protect the eyes from toxic insults. The main recommended safety masks, safety glasses, protective chemical safety glasses, safety goggles, face shield.

A8.6 body protection to avoid skin damage made by the door. According to the concentration of size, contact toxicity of choice: mask tape protective clothing, one-piece type protective clothing 52400, rubber overalls, gas seeps overalls, breathable clothing, suits the general work of poison.

A8.7 hand protection mainly uses the protective gloves, rubber gloves, latex gloves, acid and alkali resistant gloves, anti chemical gloves, skin protective film etc..

A8.8 other protection mainly complete homework personnel's personal hygiene requirements, on-site monitoring, attention matters of toxicant and regular experience of [C].

The physicochemical characteristics of A9 (physical and chemical properties)

Appearance and properties of A9.1 products is mainly material under normal temperature and pressure of the color, smell and the present state of [A].

A9.2 fill in pH pH.

The melting point of A9.3 fill numerical under normal temperature and pressure, numerical special conditions shall be marked with the technical conditions.

Boiling boiling point of A9.4 to fill in the normal temperature and pressure values obtained under special conditions, technical conditions should be marked, sublimate values or decomposition value should be described and label technology conditions in boiling prior to.

A9.5 relative density (water =1) density ratio of the density of matter and 4 DEG C water fill in 20 c..

A9.6 relative density (air =1) ratio of vapor density and air density material to fill in the 0 c..

The saturated vapor pressure of a certain temperature A9.7, in a vacuum container pure liquid and vapor equilibrium pressure, with (kPa) representation, and indicate the temperature of [C].

A9.8 produced 1 mole of a substance combustion heat of complete combustion heat, using (kJ/mol) representation of [C].

The A9.9 critical temperature (c) the highest temperature pressurizing the gas liquid when permits (c) said, with [C].

A9.10 critical pressure to the minimum pressure required for gas liquid at the critical temperature, using (MPa) representation of [C].

A9.11 octanol / water partition coefficient is used to predict a chemical in the soil adsorption, biological absorption, Xin fat storage and bioaccumulation of important parameters. When a chemical dissolved in octanol / water mixture, the chemicals in the ratio concentration of octanol and water is called partition coefficient, usually the base 10 logarithm form (Log POW) said.

A9.12 flash in the specified conditions, the specimen was heated to its vapor and air mixed gas flame, can produce the minimum temperature of flashover, fill indicate open cup or closed cup value.

A9.13 ignition temperature (temperature of combustion) refers to under the normal temperature, the mixture of combustible gas and air heating a container, the minimum temperature of reaction vessel wall when the fire started.

A9.14 explosion limit of the gas mixed with air to form combustible gas mixture, the upper limit value of gas and liquid unit (%V/V) said that the dust (mg/m3) said.

A9.15 lower explosion limit of gas mixed with air to form combustible gas mixture, the lower limit value, expressed in units of the same value and limit.

A9.16 solubility and the solubility of the material at room temperature and atmospheric pressure, respectively using the miscible, Yi Rong, soluble and slightly soluble and insoluble said its dissolution degree.

A9.17 mainly uses to fill in the main use of [C].

A9.18 other physicochemical properties on the properties of certain substances unique set of non data item, such as: fixed particle size, volatile organic matter content, evaporation rate, viscosity, freezing point, radioactive, corrosive, deflagration, detonation velocity, the point of minimum ignition energy of [C].

A10 stability and reactivity (stability and reactivity)

A10.1 stability at room temperature and pressure, or the expected storage conditions, whether the chemical behavior of the material stability, respectively, with stable, unstable said.

A10.2 avoid contact conditions may lead to external conditions indicate deleterious effects of chemicals, such as heat, light, air and moisture, shock, contact extrusion etc..

A10.3 cut material marked clearly contradict the chemicals in the chemical properties of the material.

A10.4 hazardous polymerization shows that the material in the external conditions, can appear the polymerization accident, respectively, cannot occur that can happen.

A10.5 decomposition products harmful substances may be a qualitative description of the final generated in combustion or chemical reaction at.

A11 toxicology data (toxicological information)

Acute toxicity of A11.1 with LD50, LC50 said the acute toxicity.

A11.2 sub acute and chronic toxicity mainly by fill in animal toxicity of subacute and chronic exposure to the manifestations and histopathologic examination results of [C].

A11.3 stimulation in stimulating experimental results on animal skin and eyes. Respectively with mild, moderate and severe said its stimulus intensity.

A11.4 sensitization in animal experimental results after exposure to [C].

Mutagenicity of A11.5 fill in Salmonella reverse mutation test (Ames test) data consisting mainly of rats, mice, and other test results. With the lowest dose said [C].

The chemicals are experiment results of teratogenicity of A11.6 teratogenicity fill. The lowest dose that available [C].

The carcinogenicity of A11.7 to fill in the international agency for research on cancer (IARC) assessment conclusion expert group. The lowest dose that available [C].

A11.8 other fill in other related data, such as reproductive toxicity, neurotoxicity of [C].

A12 ecological information (ecological information)

Ecological toxicity of A12.1 shows that the chemicals to aquatic organisms (algae, invertebrates, fish), for terrestrial organisms (plants, locust earthworm, birds), the beneficial microbial toxicity, available median lethal dose (LD50), median lethal concentration (LC50), non effect dose (NOEL), half tolerance (TLm) said.

The biodegradation of A12.2 shows that the chemicals are having biodegradability, illustrate its biodegradation ability through experimental data, for a period of time the biodegradation percentage.

A12.3 non biodegradable illustrate the chemicals are with non biodegradable, such as photolysis, hydrolysis.

A12.4 bioconcentration and bioaccumulation illustrate the chemical characteristic of biological enrichment. Enrichment can be divided into environment for aquatic and terrestrial organisms, chemicals are organisms intake and retention after a period of time, consumption, distribution, transformation and excretion of the four interrelated processes to form a dynamic balance, concentration of chemicals in the organism and the environment medium than the constant value. Such as enriching the fill fish biotic coefficient (BCF) value of [C].

A12.5 other harmful effect refers to the potential effects of [C] on the destruction of the ozone layer and global warming.

A13 waste disposal

A13.1 waste properties indicate whether it belongs to dangerous waste waste. The standard to judge the national hazardous waste list.

A13.2 waste disposal method only to fill in the processing method of harmful chemical substances, can reuse of harmless such as incineration, chemical oxidation, dissolution, deep buried etc..

A13.3 waste matters needing attention when chemicals and outer packaging waste disposal, protection of operator and environment conditions needed.

A14 transport information (transport information)

A14.1 dangerous goods code according to GB6944-86 fill the risk categories and classification number.

A14.2 UN the number of UN "recommendations on the transport of dangerous goods" provisions of the no..

The degree of fill in the dangerous goods Dangerous A14.3 marks, clearly marked (primary and secondary) risk.

A14.4 packaging category divided by the principle of determining GB/T15098-94 packaging category.

A14.5 packaging method according to "dangerous goods transport management rules" (promulgated by the Ministry of Railways) regulations and the UN "recommendations on the transport of dangerous goods" fill.

A14.6 transport note to fill in the transport of chemicals, prevention should pay attention to the conditions of transport, packaging method, and material, sign, also should notice (shipping, shipping, rail transport, road transport and other) to prevent accidents.

The regulations of A15 information (regulatory information)

Regulations of safety management A15.1 domestic chemicals mainly for chemicals management and use as well as the operator to provide the relevant chemical aspects of domestic regulatory information. As the regulations on safety management of dangerous chemical articles [A].

A15.2 international regulations mainly provide international regulatory information about chemicals management and operation of the [C].

A16 other information (other information)

Reference A16.1

A16.2 filling time to fill in the time of CSDS [A].

A16.3 filling department to fill in the CSDS Department of [A].

A16.4 data auditing units to fill in the audit of the CSDS unit [A].

A16.5 modifications to fill in the revised CSDS to do a simple description of [A].

A16.6 other information required to add other information or instructions [C].

SGS

SGS is Societe Generale de Surveillance S.A., translated as "sgs".

It was founded in 1887, Multi-National Corporation is currently the world's largest, oldest private third party engaged in product quality control and technical appraisal. Headquartered in Geneva, with 251 branches around the world, 256 specialized laboratories and more than 40000 professional and technical personnel, carry out product quality inspection, monitoring and assurance activities in 142 countries.

China in 1991 and China standard development company (General Administration of quality supervision of subordinate units) to set up a joint venture company, that is, SGS-CSTC standards technical services Co. Ltd., at present the country set up 24 branch offices, the staff more than 5000 people, mainly engaged in inspection, testing, certification, factory inspection and other trade security related work.

According to the company said, there are 23 countries in the world at present (especially in developing countries) of the government to implement the SGS inspection include: Angola, Argentina, Bolivia, Burkina Faso, Burundi, Kampuchea, Cameroon, Africa, the Republic of Congo, Ivory Coast, Ecuador, Guinea, Kenya, Malawi, Mali, Mauritania, Mexico, Paraguay Peru, Philippines, Congo, Rwanda, Senegal, Democratic Republic of the Zambia. These full trust in the SGS fairness, scientific, authoritative and based on technical ability, commissioned SGS to implement "comprehensive supervision plan before shipment of goods into the goods" (Comprehensive Import Super-vision English is Scheme, referred to as CISS), that is, trade development, and inhibit the activities of illegal import and export.

The range of SGS services

The SGS service object includes the domestic and foreign enterprises, governments and international institutions, the scope of services covers the agricultural, mineral, petrochemical products, industrial products and consumer goods inspection, identification, testing, trade security service and international certification services. In recent years, the company's business scope......

As a global authentication service participants and expand members, Czech company in Zhejiang and the whole East China enterprises to provide all kinds of service, SGS detection, after several years of development and growth the company to carry out SGS business covers almost all industries.

SGS customs operation refers to goods goods into the country government or the authorized customs authorities signed an agreement with SGS, by SGS in the country's export goods for goods before shipment inspection, check and ratify the dutiable value (or settlement price), the tariff classification (premise of implementing HS system in the country of import under), executive import controls provisions (e.g. whether to have prior to apply for import license etc.) the original system by importing customs to Customs on goods goods into the job performed by goods into the country after identified by SGS real, rational, issued by the surveyor's report, that is "a clean report" (Clean Report of Finding, referred to as CRF), as imports of goods to the customs the declaration must submit the documents to the importing country customs by this simplified or exemption of multi-channel clearance procedures, the release of direct taxes, both to speed up the clearance (generally do not review), and tight regulation. On the other hand, is the issue of "cannot be redeemed report" (Non-Ne-gotiable Report of Findings), so, even if the goods arrive at the port of destination in the country of import customs clearance, the customs shall not, exporters can't exchange settlement. SGS customs operations generally includes the following content: 1, inspection (inspection) specification of goods, the number of (RE) quantity and packing. Including physical testing, chemical analysis and visual inspection of goods, log (weight) in accordance with the conventional method in the international trade of identification; packaging requirements the goods will reach the port of destination consignee intact. For pharmaceuticals and chemicals to check validity period etc..

2, monitoring of bulk cargo loading requirements. One is to ensure that the cargo is through the SGS examination (inspection) before, two is to ensure that the goods under contract completely and firmly mounted on the transport ship specified. For container cargo requirements for surveillance operations and sealing packing.

3, the approved price. That is, to review the transaction price, this is the most important content of implementation of CISS, but also attract one of the reasons in many countries, the purpose is to prevent the importer low-cost high reported, avoid capital flight, or to prevent the high price and low daily, evades duty. The computer network to collect and store the various channels of business with SGS, and requires exporters to provide price list, such as composition, the ex factory price, product packaging fees, storage fees, to the dock of freight, shipping charges, sea or air fees, commissions and commercially acceptable surcharges on price, to the same export price or local consumption price comparison, the seller price and price factors to verify final commercial invoice whether accord with normal export price in the country of origin of the goods supply country, ensure the rationality of the duty paid price and import foreign exchange expenditure.

4, the customs tariff classification. Audit importers import licenses reported in the existing tariff with the provisions of the customs tariff is consistent, or see on the basis of inspection objects put forward reasonable tax rate, to ensure the accuracy of full levy tariffs and customs statistics.

5, the audit whether imports of compliance with the import of foreign trade, customs law, import the necessary permits are complete and lawful, to effectively eliminate undocumented arrival and contraband, illegal import control of goods. SGS operating procedure is as follows:

1, the export transaction. According to the trade procedure and the importer exporter normal reach export transactions, the importer then inform the country about the deal SGS liaison office, at the same time, please inform exporters need SGS CSTC inspection. SGS CSTC received notice of the importing country SGS Liaison Office (inspection number), fax (mail) to the exporter a marked "SGS inspection number" (I.O.NO.) and SGS CSTC "ICN" number blank inspection application form (RFI), notify the exporters to submit documents, arrange the inspection of goods.

2 for inspection. Arrangements for the inspection, the exporter or the declaration for export goods shall be in preparation for 7 days before should fill in application form duly with SGS test number of inspection (RFI), together with the following documents facsimile (send) to leave the inspection place recently SGS CSTC branch.

These documents including the proforma invoice, packing list and spare parts list form, product specifications, samples, letter of credit, the test report (machine / equipment manufacturer), manufacturer analysis report (chemical / pharmaceutical / oil / dye products), health certificate (food), phytosanitary certificate (all agricultural products, factory) inspection and analysis of single (all steel materials and primary products). All documents submitted to the SGSCSTC to indicate the SGS test number (the number to see the inspection application form).

Should the details listed suppliers in inspection application, such as contact person and contact telephone number, inspection time, inspection locations, so that SGS CSTC contact, arrange inspection.

3 accept the inspection. Pre shipment inspection required by the CISS national regulations, SGSCSTC does not charge any fees to the exporter. Exporters have an obligation to the goods ready and provide necessary (handling) labor and equipment, in order to test completed successfully. The exporter if the principal supplier or agent to arrange inspection, exporters have the obligation to ensure that suppliers or agents clear inspection requirements. If the goods are not in accordance with the requirements of ready or do not have the test conditions, SGSCSTC retention suspend inspection rights. Each batch of the "comprehensive import supervision plan (CISS)" of the goods shall be determined by the SGSCSTC physical test. SGSCSTC inspector will control the exporter form file, examine the goods name, quantity, specifications, appearance quality, necessary to sample.

4 for the issuance of certification. Export goods by shipping to the customs declaration, the exporter shall prepare the original bill of lading, invoice packing list, to SGS for the issuance of certification. SGS CSTC completion of the inspection, the exporter shall according to the country of the final document facsimile (send) respectively to SGS CSTC Shanghai Ministry of Economic Affairs (EAD). All the documents should be submitted to the SGSCSTC indicate SGS test number (the number to see the inspection application form). If SGSCSTC test results final document with exporters have difference or the file is complete, the SGS in conjunction with the exporter contact, request to modify the file, supplementary documents or notify the importer SGS Liaison Office in order to obtain the confirmation, the importer.

5 to SGS to receive the survey report. If the exporter receives the letter of credit to? Quot; SGS security label affixed in exporters invoice "(Security lable), the exporter may submit a final export to the recent SGS CSTC branch, and to receive a security label, or request the SGS CSTC will be mailed to the exporters a security label. Please note that only at the completion of the above 1-4 program, SGSCSTC will issue a security label.

In addition, SGS also requires manufacturers to the clearance of a few days ago, call the relevant name of ship, dock, shipping (S/D) number of chips, so that the SGS thinks it is necessary to retest again. Co SGS and now the official institutions - the Chinese government the State Commodity Inspection Bureau, the State Commodity Inspection Bureau designated by the China Import and Export Commodity Inspection Corporation (CCLS) agent for them to export from China to pre shipment inspection of implementation of CISS national commodity, the approved price and tariff, and agent SGS to issue a clean report. At present has the authority to issue has Liaoning, Beijing, Tianjin, Hebei, Shandong, Hubei, Shanghai, Guangdong and other 10 import and export commodities inspection corporation.

The misunderstanding of the SGS Report

1, "the SGS report" is only test report, namely the testing report issued by SGS, not RoHS authentication mechanism; < - described here is not accurate, about ROHS, RoHS is a standard, was developed by the EU, SGS only on the sample to determine whether conforms to the RoHS standard, and need to decide whether RoHS conclusion in the report according to the customer, that conforms to the RoHS standard in the report. The RoHS is only restricted to a universal standard substance in the test, it is not restricted substances testing of all, it is not a test of all. In general, concepts from large to small is detection - > - > chemical detection limit detection using RoHS Standard Test - > substance

2, "the SGS report only to send the samples to the detection project data reliability is responsible, but not on the products comply with RoHS directive requirements for;

3, to send samples to mention detection project data, and "SGS report" is the permanent and effective;

4, the "SGS report" is not just "lead free test";

5, the "SGS" SGS Societe Generale de Surveillance is short for S.A., translated as "SGS", "the only agency SGS report" is not a RoHS directive requirements and testing; there are such as: ITS report, CQC report.......

6, "the SGS report" not only carry out the requirements of the RoHS directive 6, also undertake national regulations cited "environmentally hazardous substances" testing, safety testing and others.

So SGS is not equal to RoHS, not the fill in the RoHS place to fill in the SGS!

SGS explained in a semiconductor in

Used for high purity silicon chip called semiconductor grade silicon (semiconductor-grade silicon), referred to as SGS.